Test Operation and Panel Display
The following table shows the panel display for the negative sign.
Example of
the displayed value
4
Note:
Dec means the value is displayed in decimal format; Hex means the value is displayed in hexadecimal
1.
format.
The display shown above is applicable in both Monitoring mode and Editing mode.
2.
All monitoring variables are 32 bits, and you can switch the high / low word and the display method
3.
(Dec / Hex). As described in Chapter 8, each parameter only supports one display method and
switching the display method is not allowed.
4-10
If the value is -12345, it displays as 1.2.345 (only in decimal format;
there is no positive or negative sign for hexadecimal format display).
Description
ASDA-A3