Ip Interface Configuration - Avaya G450 Cli Reference Manual

Roadmap

IP interface configuration

Table 43: IP interface configuration CLI commands
Root level command
interface console
interface dialer
interface
fastethernet
interface loopback
interface serial
interface tunnel
interface
USB-modem
interface vlan
interface
{console|dialer|
FastEthernet|
loopback|serial|
tunnel|USB-modem|
VLAN}
see
IP interface
configuration
76 Avaya G450 CLI Reference
First level command Description
Enter the Console interface configuration
mode, create the interface if it does not exist,
or delete the Console interface
Enter the interface Dialer context, create the
Dialer interface if it does not exist, or delete
the Dialer interface
Enter interface FastEthernet configuration
mode, create a FastEthernet interface if it
does not exist, or delete a FastEthernet
interface
Enter interface Loopback configuration mode,
create a Loopback interface if it does not
exist, or delete a Loopback interface or
sub-interface
Enter Serial interface or sub-interface
configuration mode, create a Serial interface
if it does not exist, or delete a Serial interface
or sub-interface
Enter interface tunnel configuration mode,
create an interface tunnel if it does not exist,
or delete an interface tunnel or sub-interface
Enter the configuration context for the
USB-modem interface, or reset the
USB-modem interface settings to their factory
defaults
Enter interface VLAN configuration mode,
create a VLAN interface if it does not exist, or
delete a VLAN interface
Enter interface configuration mode for the
Console, Dialer, FastEthernet, Loopback,
Serial, Tunnel, USB-modem, or VLAN
interface
1 of 2