Copying The Firmware File To A Tftp Server Or An Ftp Server; Reviewing Safety Requirements; Verifying Equipment - Avaya IG550 Installing And Configuring

Installing an IG550 Integrated Gateway using the Disk on Key
8. Use WinZip or another zip file tool to unzip the file, if necessary.

Copying the firmware file to a TFTP server or an FTP server

1. To load the firmware on a TGM550, place the firmware file on a TFTP or FTP server that is
connected to the customer's LAN.
A TFTP server is typically a standalone customer computer residing on the customer's LAN
or WAN. In cases where the supporting Communication Manager server is an S8300 Server
that is readily accessible to the router over the LAN or WAN, the firmware can be uploaded
to the /tftpboot directory on the S8300 Server.
Note:
Use a Linux-based or a Unix-based TFTP server only if the customer already has
Note:
an existing one. In these cases, download the file to your laptop computer and
give the file to the customer for proper placement and execution. If the customer
does not have a TFTP server or an FTP server you can use, download a TFTP
server to your laptop to use with the firmware upgrades.

Reviewing safety requirements

1. See
General Safety Guidelines and Warnings on page 187

Verifying equipment

1. Verify that you have the following on site:
Electrostatic discharge (ESD) grounding strap (not provided)
●
For rack or wall installation, flathead and Phillips head screwdrivers appropriate for the
●
screws or anchors (not provided)
For the Communication Manager server, a license enabled for media gateway
●
announcements
14 Installing and Configuring the IG550 Integrated Gateway
.