Editing Wall Joins - Autodesk 24000-000000-9860 - Revit Architecture - PC User Manual

Walls squared off at 90 degrees
You cannot square off the join of one wall that is joined with the interior of another wall, because there is
only one configuration for the join. You can change the visibility of the line separating the 2 walls by
cleaning the wall join.
Interior wall join
Related topics
Design Options and Wall Joins

Editing Wall Joins

NOTE The Edit Wall Join command is not recommended for complex wall joins (for example, a wall join with
more than 4 walls, a wall join on many floors, or a wall join that is in more than one workset). For more information,
see Editing Complex Wall Joins
1 Click Tools menu
2 Move the cursor over the wall join and click.
A square encloses the wall join.
3 On the Options Bar, select a join type:
Butt: Creates a butt join between the walls. This is the default join type.
on page 1258
on page 583.
Edit Wall Joins, or on the Tools toolbar, click .
Wall Joins | 581