Parking Components - Autodesk 24000-000000-9860 - Revit Architecture - PC User Manual

Name
Slope
Perimeter
Area
Volume
Phasing
Phase Created
Phase Demolished

Parking Components

Parking components are parking spaces that you can add to a toposurface. After placing a parking component,
you need to define the toposurface as its host.
To add parking components:
1 Open a view that displays the toposurface to modify.
2 Click Site menu
3 Place the pointer on the toposurface and click to place the component. Place as many components
4 After placing the components, on the Design Bar, click Modify.
5 Select the parking components.
6 On the Options Bar, click Pick Host.
7 Select the toposurface.
When you use the Pick Host command, you are deliberately setting the parking component on top of the
toposurface. If you move the parking component around on the toposurface, it remains attached to the
toposurface.
You can create a schedule of parking components. See
Description
The building pad slope. This is a read-only parameter.
The building pad perimeter. This is a read-only parameter.
The area of the building pad. This is a read-only parameter.
The volume of the building pad. This is a read-only parameter.
Sets the phase when the building pad is created.
Sets the phase when the building pad is demolished.
Parking Component, or on the Site tab of the Design Bar, click Parking
Component.
as desired. You can also create an array of parking components. See
on page 294.
Schedule Views on page 124.
Parking Components | 907
Using Arrays of Elements