Closing An Open Loop - Autodesk 24000-000000-9860 - Revit Architecture - PC User Manual

Closing an Open Loop

You can use the Close snap to close valid open loops when sketching. If there is more than one option to
close the loop, you can move the cursor or press Tab to see other snap options.
To close an open loop:
1 Begin sketching off of the open loop.
2 Use the keyboard shortcut SZ, or right-click, click Snap Overrides
264 | Chapter 6 Sketching
NOTE When sketching, the status bar indicates when there is a valid open loop to close, and lists
the keyboard shortcut (SZ).
snaps to close the loop.
If there is more than one option to close the loop, you can move the cursor or press Tab to see
other close options.
Close. Revit Architecture