5 Select the element that you placed, for example, a window and click
6 Locate the parameter that you chose when creating the label in either the Instance or Type
7 Enter a value for the parameter and click OK twice.
Applying the Label to a Titleblock in a Project
1 In a project, click File menu
2 Create a sheet using the titleblock. See
3 Select the label and click
4 From the Instance properties list, locate the parameter you defined for the family and enter a
5 Click OK.
Creating a Section Head Family
The Section Head Family creates the symbol that appears at the end of the section line. Revit Architecture
designates a default symbol, but you may want to use your own symbols to define different sections. By
specifying a family for section heads, your project can include more than one symbol.
properties. For example, if you defined the label to include the Manufacturer parameter, click
Edit/New to open the Type properties.
The label value appears in the tag.
The new sheet view opens with the label you created in the titleblock family.
value for it.
Load From Library
Load Family.
Sheets
on page 968.
.
Applying the Label to a Titleblock in a Project | 433
.
Need help?
Do you have a question about the 24000-000000-9860 - Revit Architecture - PC and is the answer not in the manual?