Autodesk 24000-000000-9860 - Revit Architecture - PC User Manual page 918

Name
Cost
Foundation Slab Instance Properties
Name
Constraints
Level
Height Offset From Level
Related to Mass
Structural
Structural
Rebar Cover - Top Face
Rebar Cover - Bottom Face
Rebar Cover - Other faces.
Estimated Reinforcement Volume
Dimensions
Slope
Perimeter
Area
Volume
Width
Length
880 | Chapter 12 Working with Structural Components
Description
already used but allows you to continue using it. You can see the warning using
the Review Warnings command. See
The pricing of the slab.
Description
Specifies the level that the slab is constrained to.
Specifies the elevation of the top of the slab relative to the constrained level of
the slab.
This is a read-only value.
If checked, Slab has an Analytical Model and is exported to analysis packages
The rebar cover distance from the foundation slab top face.
The rebar cover distance from the foundation slab bottom face.
The rebar cover distance from the foundation slab to an adjacent element face.
Specifies the estimated reinforcement volume of the selected element. This is a
read-only parameter that only displays when rebar has been placed.
Specifies the slope of the slab from the horizontal plane
Indicates the slab perimeter. This is a read-only parameter.
Indicates the area of the slab. This is a read-only parameter.
Indicates the volume of the slab. This is a read-only parameter.
Indicates the width of the slab, if rectangular. This is a read-only parameter.
Indicates the length of the slab, if rectangular. This is a read-only parameter.
Reviewing Warning Messages on page 1334.