Deleting A Line Pattern; Structural Settings; Structural Settings Dialog; Symbolic Representation Settings Tab - Autodesk 24000-000000-9860 - Revit Architecture - PC User Manual

Deleting a Line Pattern

1 Click Settings menu
2 In the Line Patterns dialog, select the line pattern.
3 Click Delete.
4 When prompted to confirm the deletion, click Yes.

Structural Settings

For each project, you can control the symbolic representation of structural framing components. You can
specify the symbolic cutback distance of beams and columns (see
brace symbols in plan, moment symbols, and analytical model adjustment. The values you specify are applied
to structural framing components throughout the project. You can also save these settings as part of a
template.
NOTE Most of the settings in the Structural Settings dialog are available if the project was created using the
structural template.

Structural Settings Dialog

The Structural Settings dialog lets you modify settings that are specific to documentation and analysis of
structural models, specifically Symbolic Representation Settings.

Symbolic Representation Settings Tab

The values that are entered on this tab reflect the plotted representation of the drawings. Therefore, the
visible representations that are set with these values will change based on the view scale of the drawing.
Open Structural Settings dialog
1 Click Settings menu
Modify symbolic cutback distance
2 On the Symbolic Representation Settings tab, enter a value for the symbolic cutback distance
488 | Chapter 9 Customizing Project Settings
Line Patterns.
Structural Settings.
for brace, and beam/truss.
This setting affects the distance between steel beams and beams/trusses, and between beams
and braces. Members must be joined to see the change in the cutback distance. Changes to this
setting are applied only to the symbolic representation of structural framing components.
Cutback distance at larger setting in coarse mode
Cutback Default Settings on page 782),