Autodesk 24000-000000-9860 - Revit Architecture - PC User Manual page 1076

Changing a Continuous Grid Line
1 Open a view that displays grid lines.
2 Select a grid line, and click
3 In the Element Properties dialog, click Edit/New.
4 In the Type Properties dialog, do the following:
5 Click OK twice.
Creating a Grid Line with a Center Gap
1 Open a view that displays grid lines.
2 Select a grid line, and click
3 In the Element Properties dialog, click Edit/New.
4 In the Type Properties dialog, do the following:
1038 | Chapter 16 Annotating and Detailing
For Center Segment, select Continuous.
For End Segment Weight, End Segment Color, and End Segment Pattern, specify the line
weight, color, and pattern of the grid line.
Use the other parameters to indicate which grid bubble to use and where it should display.
See Grid Type Properties
Revit Architecture updates all grid lines of this type in all views.
For Center Segment, select None.
For End Segment Weight, End Segment Color, and End Segment Pattern, specify the line
weight, color, and pattern of the segments to display on each end of the grid line.
For End Segments Length, enter the length of the segments (in paper space) to display on
each end of the grid line.
(Element Properties).
on page 1040.
(Element Properties).