Autodesk 24000-000000-9860 - Revit Architecture - PC User Manual page 513

Water Properties
You can define the following properties for water materials on the
dialog.
Property
Type
Color
Wave Height
Wood Properties
You can define the following properties for wood materials on the
dialog.
Property
Image File
Stain
Stain Color
Finish
Used For
Bump
Amount
Transparency and Translucency
When defining a render appearance that uses
surface are created by light bouncing off it. Of the light that strikes a surface, the Transparency and
Translucency properties specify the amount of light that bounces off the surface rather than passing through
or being absorbed by it.
Description
Type of water source.
Color of the water (available when Type is not Swimming Pool). Select a predefined
water color, or select Custom to specify a color.
Relative height of waves in the water. Enter a value between 0 (no waves) and 5 (big
waves), or use the slider.
Description
The image to use to represent the surface of the wood (the wood grain). See
an Image File for a Render Appearance
Whether the wood is stained.
Color of the wood stain (when Stain is Color). Click the color swatch. In the Color
dialog, select a color. (See Colors
Texture of the finished surface.
Purpose of the wood: Flooring or Furniture.
Bump pattern to use on the finished surface. To define bumps using an image, select
Custom. See Specifying an Image File for a Render Appearance
Relative depth of the wood grain, when Bump is Based on wood grain. Enter 0 for a
flat surface, a positive number (between 0 and 10) to raise the grain, or a negative
number (between 0 and –10) to reverse the grain.
Generic Material
Changing the Render Appearance of a Material | 475
Render Appearance tab
Render Appearance tab
on page 476.
on page 514.) Click OK.
Properties, remember that reflections on a
of the Materials
of the Materials
Specifying
on page 476.