Floor Instance Properties - Autodesk 24000-000000-9860 - Revit Architecture - PC User Manual

Name
Manufacturer
Type Comments
URL
Description
Assembly description
Assembly code
Type Mark
Cost
Design Option

Floor Instance Properties

Name
Constraints
Level
Height Offset From Level
Related to Mass
Structural
Structural
Dimensions
Slope
648 | Chapter 11 Working with Architectural Components
Description
The manufacturer of the flooring material.
Comments about the floor type.
Link for a manufacturer web page.
Provides a description of the floor.
Description of the assembly based on the assembly code selection.
Uniformat assembly code selected from hierarchical list.
A value to designate the particular floor. This value must be unique for each floor
in a project. Revit Architecture warns you if the number is already used but allows
you to continue using it. (You can see the warning using the Review Warnings
command. See Reviewing Warning Messages
Cost of the flooring. This can be included in a schedule.
If design options have been created, this property indicates the design option in
which the element exists. For more information on design options, see
tions on page 1237.
Description
The level with which the floor is associated.
The height at which the floor is offset from the level.
Indicates that the element was created from a mass element. This is a read-only
value.
Indicates that the element has an analytical model. This is a read-only value.
Changes the value of slope-defining lines to the specified value, without the need
to edit the sketch. The parameter initially displays a value if there is a slope-defining
line. If there is no slope-defining line, the parameter is blank and disabled.
on page 1334.)
Design Op-