Autodesk 24000-000000-9860 - Revit Architecture - PC User Manual page 761

Name
Top is Attached
Room Bounding
Related to Mass
Vertical/Horizontal Grid Pattern
Number
Justification
Angle
Offset
Structural
Structural Usage
Dimensions
Length
Area
Identity Data
Description
Indicates whether the curtain wall top is attached to another model component,
such as a roof or ceiling. This is a read-only value.
If selected, the curtain wall is part of a room boundary. If not selected, the
curtain wall is not part of a room boundary. This property is read-only before
creating a curtain wall. After you draw the wall, you can select it and then
modify this property.
Indicates that the element was created from a mass element. This is a read-only
value.
If Layout (under Vertical/Horizontal Grid Pattern) is set to Fixed Number, enter
a value here for the number of curtain grids on the curtain instance. The max-
imum value is 200.
Determines how Revit Architecture adjusts the spacing of grids along the curtain
element face, when the grid spacing does not divide evenly into the length of
the face. Justification also determines which gridlines are first removed or added
when gridlines are added or removed because of parameter changes or changes
to the size of the face. Beginning adds space to the end of the face before
placing the first grid. Center adds an even amount of space at both the begin-
ning and end of the face. End adds space from the beginning of the face before
placing the first grid.
Rotates the curtain grids to the specified angle. You can also specify this value
for individual faces. If you specify this parameter for a face, then no value dis-
plays in this field. Valid values are between 89 and –89.
Starts grid placement at the specified distance from the justification point of
the grids. For example, if Justification is specified as beginning and you enter
a value of 5 feet here, Revit Architecture places the first grid 5 feet from the
beginning of the face. Note that you can also set this value for individual faces.
If you specify this parameter for a face, then no value displays in this field.
Sets the structural usage of the curtain wall. This property is read-only before
creating a curtain wall. After you draw the curtain wall, you can select it and
then modify this property.
The length of the curtain wall. This is a read-only value.
The area of the curtain wall. This is a read-only value.
Curtain Element Properties | 723