Autodesk 24000-000000-9860 - Revit Architecture - PC User Manual page 579

Parameter
Floor Perimeter
Floor Area
Exterior Surface Area
Floor Volume
Level
Identity Data
Usage
Mass: Type
Mass: Family
Mass: Family and Type
Mass: Type Comments
Mass: Comments
Mass: Description
Comments
Mark
Description
The total linear dimension for the outer boundaries of the mass floor. This value
is read only.
The surface area for the mass floor, in square units. This value is read only.
The surface area for the exterior vertical surfaces (walls) from the mass floor
perimeter up to the next mass floor, in square units. For the uppermost mass
floor, the Exterior Surface Area includes the area of the horizontal surface (roof)
above it. (See Mass Floors at the Top of a Mass
only.
The combined exterior surface area of all mass floors in a mass includes the top
and sides of the mass. However, it does not include the bottom of the mass.
When you join masses, the area of the inner wall shared by the masses is deduc-
ted from the exterior surface area for each mass floor. See
Faces on page 521.
The amount of physical space between the mass floor and the surface above
it, bounded by exterior vertical surfaces between them. Floor volume is meas-
ured in cubic units. This value is read only.
The level (horizontal plane) on which the mass floor is based. This value is read
only.
A description of the intended use for the mass floor. You can enter text, or click
in the field to select an existing value.
The type of mass to which the mass floor belongs. This value is read only.
The family of the mass to which the mass floor belongs. This value is read only.
The family and type of mass to which the mass floor belongs. This value is read
only.
Comments about the type of mass to which the mass floor belongs. This value
is read only.
Comments about the mass to which the mass floor belongs. This value is read
only.
A description of the mass to which the mass floor belongs. This value is read
only.
Text that describes the mass floor.
A user-specified identifier for the mass floor.
on page 524.) This value is read
Overlapping Mass
Mass Floor Properties | 541