Creating Stairs By Sketching Boundary And Riser Lines - Autodesk 24000-000000-9860 - Revit Architecture - PC User Manual

Click endpoint on right end
To create stairs with landings, click inside the rectangle to create a short run; the number of risers created
is displayed. You can then click another start point and end point for the remaining stairs.
First run of stairs- 9 risers created with 9 remaining
Additional run of stairs perpendicular to the original
Completed sketch with landing created automatically
You can modify the sketch of the footprint for the stairs. In the next figure the landing of the sketch has
been modified.
Run of stairs after modification

Creating Stairs by Sketching Boundary and Riser Lines

You can define your stairs by sketching boundaries and risers.
Creating Stairs by Sketching Boundary and Riser Lines | 663