Railings - Autodesk 24000-000000-9860 - Revit Architecture - PC User Manual

Name
Down label
Show Up arrow in all views
Dimensions
Width
Identity Data
Comments
Mark
Phasing
Phase Created
Phase Demolished

Railings

You can add railings as free-standing components to levels, or attach them to hosts (such as floors, ramps,
or stairs).
When you sketch a railing, rails and balusters are automatically placed on the railing at evenly spaced
intervals. For information on editing baluster and post placement, see
and Posts on page 683.
The shape of rails and balusters are determined by profile families loaded in the project. See
on page 688.
680 | Chapter 11 Working with Architectural Components
Description
Indicates whether the down text appears.
Indicates whether the up arrow appears in all views.
Width of the ramp.
Specific comments about the ramp.
A unique identifier for the ramp.
The phase when the ramp was created. See
The phase when the ramp was demolished. See
Creating Phases on page 1264.
Demolishing Elements on page 1270.
Controlling Placement of Balusters
Railing Properties