Windows - Autodesk 24000-000000-9860 - Revit Architecture - PC User Manual

Name
Identity Data
Comments
Mark
Phasing
Phase Created
Phase Demolished
Other
Head Height

Windows

You add windows to a wall in a plan, elevation, or 3D view. You can place a window on any type of wall,
including arc walls, in-place walls (and in-place roofs in the case of a skylight), and face-based walls (for
example, a sloped wall). Revit Architecture automatically cuts the opening and places the window in the
wall.
To insert a window in a curtain wall, select a panel of the curtain wall and use the Type Selector to change
it to a wall. Then insert the window in the wall. (See
Wall Doors and Windows
Description
Specific comments related to the door that are not already covered in the description
or type comments.
Applies a door number to any door for reference purposes. This value must be unique
for each door in a project. Revit Architecture warns you if the number is already
used but allows you to continue using it. You can see the warning using the Review
Warnings command. See
1.
The phase when the door was created.
The phase when the door was demolished.
The height of the top of the door. Note that this does not change the door size.
on page 418.)
Reviewing Warning Messages
Wall Panels in Curtain Walls
on page 1334. The default is
on page 711 and Curtain
Windows | 737