Autodesk 24000-000000-9860 - Revit Architecture - PC User Manual page 666

5 Use the Trim command to trim the excess sketch lines and close the sketch loop. See
6 On the Design Bar, click Finish Sketch.
628 | Chapter 11 Working with Architectural Components
Wall highlighted for soffit line
Sketch lines for soffit after picking walls
and Extending Elements
To see the soffit better, create a section view through the plan view that shows the wall meeting
the roof. See Creating a Section View
Roof, soffit, and wall in section view
on page 316.
on page 92.
Trimming