Restoring A Selection; Removing Elements From A Selection - Autodesk 24000-000000-9860 - Revit Architecture - PC User Manual

Select Panels on Face (available for curtain systems created by face only)
Select Panels on Host
Selecting Mullions
The shortcut menu options for selecting multiple mullions vary depending on whether you access them
from the curtain host element or a selected mullion.
If you right-click a curtain wall and click Select Mullions, the following options are available:
Select Mullions on Vertical Grid. Selects all interior mullions on vertical grids.
Select Mullions on Horizontal Grid. Selects all interior mullions on horizontal grids.
Select All Mullions. Selects all mullions on the host.
If you right-click a curtain system or sloped glazings and click Select Mullions, the following options are
available:
Select Mullions on Grid 1. Selects all interior mullions that lie on the grid 1 layout. For more information
on grid layouts, see
Select Mullions on Grid 2. Selects all interior mullions that lie on the grid 2 layout.
Select All Mullions. Selects all mullions on the host.
If you right-click an individual mullion and click Select Mullions, the following options are available:
Select Mullions on Gridline. Selects all mullions that lie on the same gridline as the selected mullion.
Select Mullions Across Gridline. Selects all interior mullions that lie on gridlines opposite the gridline
on which the selected mullion lies.
Select Mullions on Vertical Grid. Selects all vertical mullions.
Select Mullions on Horizontal Grid. Selects all horizontal mullions.
Select Inner Mullions. Selects all interior mullions on the same face as the selected mullion.
Select Border Mullions. Selects all border mullions on the same face as the selected mullion.
Select Mullions on Host. Selects all mullions on the host.

Restoring a Selection

To restore a selection (of one or more elements) that you have cleared, while pressing CTRL, press the LEFT
ARROW on the keyboard. Alternatively, you can right-click anywhere in the drawing area, and click Select
Previous on the shortcut menu.
You can only restore a selection while Modify is active. If you switch to a different command, the selection
is cleared.

Removing Elements from a Selection

To deselect an element, while pressing SHIFT, click the element. Other selected elements remain selected.
278 | Chapter 7 Editing Elements
Type-Driven Curtain Element Layout on page 705.