Autodesk 24000-000000-9860 - Revit Architecture - PC User Manual page 904

4 Click Pick Walls, and select the walls in your model.
5 Click check Extend into wall if you want the offset to be measured from the wall's core.
6 Specify an offset for the slab edges by clicking in the Offset text box.
7 On the Sketch tab, click Finish Sketch.
NOTE To add openings to a slab, see
866 | Chapter 12 Working with Structural Components
NOTE Instead of picking walls you can sketch a slab. Click Lines, and use the sketch tools
to form the boundary of the slab. The sketch must form a closed loop or boundary condition. See
Sketching on page 251.
Cutting Openings in Slabs on page 871.