Specifying Project Information; Specifying Energy Analysis (Gbxml) Settings - Autodesk 24000-000000-9860 - Revit Architecture - PC User Manual

You can specify which standards to copy. Any object not explicitly marked for copying yet referenced by a
copied object is copied. For example, if you select a wall type and forget to copy the material, Revit
Architecture copies it.
To transfer project standards:
1 Open both the source and target projects.
2 In the target project, click File menu
3 Select the source project for Copy from.
4 In the Select Items to Copy dialog, select the desired project standards. To select all project
5 Click OK.
6 If the Duplicate Types dialog opens, select from the following options:

Specifying Project Information

1 Click Settings menu
2 In the Element Properties dialog, specify the following:
3 Click OK.
Project information can be included in schedules that contain elements from linked models.

Specifying Energy Analysis (gbXML) Settings

You can define the gbXML information that can be used by third-party energy analysis software.
gbXML settings specify the parameter values used by third-party software applications when calculating
energy use. The following parameters must be specified prior to exporting a gbXML file for use with an
energy analysis application:
Building Type - specifies the type of building according to the gbXML schema 0.34 (similar to ASHRAE).
Postal Code - determinates the location of the building.
Ground Plane - specifies the level that serves as the ground level reference for the building. Spaces below
this level are considered to be underground. The default level is zero.
standards, click Check All.
Overwrite: Transfers all new project standards, and overrides duplicate types.
New Only: Transfers all new project standards, and ignores duplicate types.
Cancel: Cancels the operation.
Project Information.
Energy Data, see Specifying Energy Analysis (gbXML) Settings
Project Issue Date.
Project Status.
Client Name.
Project Address: click Edit, enter the address in the text box, and click OK.
Project Name.
Project Number.
Transfer Project Standards.
Specifying Project Information | 439
on page 439.