Creating Dimensions To Model Pattern Lines; Rotating A Model Pattern - Autodesk 24000-000000-9860 - Revit Architecture - PC User Manual

4 Drag the shape handle, or use the Move command to move the pattern lines. See

Creating Dimensions to Model Pattern Lines

1 On the Drafting tab of the Design Bar, click Dimension.
2 Place the cursor on the model pattern: the cursor snaps to the pattern line, which is a reference
3 Place the dimension.

Rotating a Model Pattern

1 Place the cursor on the model pattern, and press TAB to highlight a shape handle. The Status
2 Click to select the handle.
3 On the Edit toolbar, click
4 Rotate the pattern. See
454 | Chapter 9 Customizing Project Settings
Elements on page 300.
Pattern lines after dragging shape handle. Note the differences in the pattern lines at
the top and bottom of the wall.
point. You can move the cursor toward another pattern line and press TAB to select a different
reference point.
Surface pattern lines used as references for a linear dimension
Bar indicates if you have selected a shape handle.
Rotating Elements
.
on page 308.
Moving