Pasting Elements; Pasting Elements From The Clipboard - Autodesk 24000-000000-9860 - Revit Architecture - PC User Manual

You cannot copy some combinations of elements. For example, you cannot copy curtain panels and
mullions without copying the entire curtain system.
You cannot copy some elements in any context. For example, you cannot copy the Ref. Level in the
Family Editor.

Pasting Elements

The Paste from Clipboard tool inserts elements from the clipboard to the current view or a different view.
This tool is available only after cutting or copying elements. You can only copy (or cut) and paste elements
within the same session of Revit Architecture.
The Paste Aligned tool allows you to copy multiple elements (such as walls, components, and windows) on
one level and paste them to another level exactly above or below the location of the original elements. This
tool is most useful for multi-story buildings, where you can copy and paste aligned elements from one level
to many other levels.

Pasting Elements from the Clipboard

1 Cut or copy elements to the clipboard.
2 Place the cursor in the view where you want to paste the elements.
3 Click Edit menu
See Moving Elements with Cut-and-Paste
page 320.
Paste from Clipboard, or click
NOTE You can also use the keyboard shortcut CTRL+V to paste elements.
In Paste mode, a preview image of the elements appears in the drawing area, similar to the
following. Temporary dimensions and witness lines display to help position the elements.
on page 304 or Copying Elements to the Clipboard
on the Edit toolbar.
on
Pasting Elements | 321