Aligning The Surface Pattern On A Model Element - Autodesk 24000-000000-9860 - Revit Architecture - PC User Manual

4 To change how the outer surface of the material displays in views (such as plan views and section
5 To change how the cut surface of the material displays in views, under Cut Pattern, do the
6 Click Apply.
7 To exit the Materials dialog, click OK.

Aligning the Surface Pattern on a Model Element

In a 2D view, you can align a surface pattern on a model element. For example, you can use this technique
to align the following:
ceiling tiles with a corner of a room
masonry to the edge of an exterior wall
wallpaper as desired to an interior wall
carpet as desired on a floor
Surface pattern on wall before
alignment
464 | Chapter 9 Customizing Project Settings
Click the color swatch. In the Color dialog, select a color. (See
For Transparency, enter a value between 0% (completely opaque) and 100% (completely
transparent), or move the slider to the desired setting.
views), under Surface Pattern, do the following:
To change the surface pattern, click the arrow, and select a pattern from the list.
To change the color that is used to draw the surface pattern, click the color swatch. In the
Color dialog, select a color. Click OK.
NOTE In the project, you can align the surface pattern to a model element. See
Pattern on a Model Element
following:
To change the cut pattern, click the arrow, and select a pattern from the list.
To change the color that is used to draw the cut pattern, click the color swatch. In the Color
dialog, select a color. Click OK.
on page 464.
Colors on page 514.) Click OK.
Aligning the Surface