Autodesk 24000-000000-9860 - Revit Architecture - PC User Manual page 648

If you need to attach walls to the roof, use the attach tool in the Options Bar. See
Components
After you create a roof by extrusion, you can rehost the roof or edit the work plane of the roof. For more
information, see
Changing the Work Plane of an Element
Cutting Openings in an Extruded Roof
1 Select the extruded roof, and click Cut Plan Profile on the Options Bar.
2 If the Go to View dialog is displayed, choose the appropriate plan view in which to edit the
3 Sketch closed-loop openings in the roof using the sketch tools.
4 Click Finish Sketch.
610 | Chapter 11 Working with Architectural Components
Completed extruded roof
on page 579 for more information.
Rehosting Work Plane-based and Face-based Elements and Components
profile.
A plan view representation of the roof is displayed. Reference planes define the boundary of the
roof.
Closed-loop sketches in sketch mode
Closed-loop sketches become vertical cuts
in the roof
on page 268.
Attaching Walls to Other
on page 747 and