Beam Type Properties - Concrete - Autodesk 24000-000000-9860 - Revit Architecture - PC User Manual

Name
tw
Identity Data
Assembly Code
Keynote
Model
Manufacturer
Type Comments
URL
Description
Assembly description
Type Mark
Cost

Beam Type Properties - Concrete

Properties will vary depending on the beam families that are specified during the installation process. The
following type properties apply to the concrete beam families that load during a typical installation:
Name
Structural
b
h
Identity Data
Assembly Code
Description
Web thickness.
Uniformat assembly code selected from hierarchical list.
The beam keynote. Add or edit the value. Click in the value box to open the Keynotes
dialog. See Keynotes on page 1058.
The manufacturer internal number.
The shape manufacturer.
A field for entering general comments about the shape type. This information can
be included in a schedule.
A link to a web page that may contain type-specific information.
Description of the beam. Enter a description.
Description of the assembly based on the assembly code selection. This is a read-
only value.
A value that designates the particular beam; possibly the shop mark. This value must
be unique for each element in a project. Revit Architecture warns you if the number
is already used but allows you to continue using it. You can see the warning using
the Review Warnings command. See
The pricing of the beam.
Description
Beam width.
Beam depth.
Uniformat assembly code selected from hierarchical list.
Reviewing Warning Messages
Beam Properties | 803
on page 1334.