Moving Schedule Sections; Joining Split Schedules; Adjusting Schedule Columns On A Sheet - Autodesk 24000-000000-9860 - Revit Architecture - PC User Manual

Moving Schedule Sections

The following procedure assumes that you have
on the sheet, and
To move a schedule section
1 Select the schedule section on the sheet.
2 Click the blue arrow control in the center of the schedule section, and drag it to a new location

Joining Split Schedules

You can rejoin the sections of a split schedule on a sheet. Schedule sections are sequential: you can join a
section with its previous or subsequent section. For example, if you split a schedule into 4 sections, you can
rejoin section 2 with section 1 or 3.
To rejoin schedule sections
1 On a sheet that displays a split schedule, drag one schedule section over the other.
2 Release the mouse button.

Adjusting Schedule Columns on a Sheet

When you place a schedule on a sheet, text that does not fit within a column wraps to a new line. To adjust
the column width, select the schedule. A blue triangle displays to the upper right of each column. Drag a
blue triangle to the left or right.
NOTE If the schedule is split into multiple sections, adjusting the width in one section changes the width in all
sections.
Split schedules after column width adjustment
Related topic
Modifying Schedules
1004 | Chapter 15 Preparing Construction Documents
split the schedule.
on the sheet.
The split schedule sections rejoin into one section.
on page 141
added a sheet to a project, created a schedule and placed it