Floor Sketch Line Properties - Autodesk 24000-000000-9860 - Revit Architecture - PC User Manual

Name
Perimeter
Area
Volume
Thickness
Identity Data
Comments
Mark
Design Option
Phasing
Phase Created
Phase Demolished
Structural Analysis
Structural Usage
Analytical Model
Vertical Projection

Floor Sketch Line Properties

Name Description
Constraints
Level The level with which the floor is associated.
Description
The perimeter of the floor. This is a read-only value.
The area of the floor. This is a read-only value.
The volume of the floor. This is a read-only value.
Indicates the thickness of the floor. This is a read-only value.
Specific comments related to the floor that are not already covered in the description
or type comments.
A user-specified label for the floor. This value must be unique for each floor in a
project. Revit Architecture warns you if the number is already used but allows you
to continue using it. (You can see the warning using the Review Warnings command.
See Reviewing Warning Messages
If design options have been created, this property indicates the design option in
which the element exists. For more information on design options, see
tions on page 1237.
The phase when the floor was created.
The phase when the floor was demolished.
Sets the structural usage of the floor. This property is read-only before creating a
floor. After you draw the floor, you can select it and then modify this property.
The plane of the floor used for analysis and design.
on page 1334.)
Floor Properties | 649
Design Op-