Autodesk 24000-000000-9860 - Revit Architecture - PC User Manual page 710

Name
Extend Below Base
Monolithic Stairs
Landing Overlap
Underside of Winder
Graphics
Break Symbol in Plan
Text Size
Text Font
Materials and Finishes
Tread Material
Riser Material
Stringer Material
Monolithic Material
Treads
Minimum Tread Depth
Tread Thickness
Nosing Length
Nosing Profile
Apply Nosing Profile
672 | Chapter 11 Working with Architectural Components
Description
Extends stringers below the base level of the stair. This is useful for cases where the
stringer attaches to the face of a floor opening rather than resting on the surface of
a floor. To extend the stringer below the floor, enter a negative number.
Specifies that the stairs are to be made of one material.
Enabled when stairs are set to monolithic. When a monolithic stair has a winder,
the bottom of the stair can be a smooth shape or stepped. If it is stepped, this
parameter controls the distance between the riser face and the vertical face of the
corresponding step on the underside.
Enabled when stairs are set to monolithic. If a monolithic stair has a winder, the
bottom of the stair can be a smooth shape or stepped.
Specifies whether the cutline of the stairs in plan view has a break line.
Changes the size of the UP-DN symbol in a plan view.
Sets the font of the UP-DN symbol.
Click the button to open the Materials dialog. See
information on creating a material.
See Tread Material description.
See Tread Material description.
See Tread Material description.
Sets the initial value for the Actual Tread Depth instance parameter. If Actual Tread
Depth value exceeds this value, Revit Architecture issues a warning.
Sets the thickness of the tread.
Specifies the amount of the tread depth that overhangs the next tread.
The profile for a sweep added to the front of the tread. See
371. Also see Creating Solid Sweeps
profiles to use for the sweep.
Specifies 1-sided, 2-sided, or 3-sided tread nosing.
Materials on page 459 for more
Profile Families
on page 381. Revit Architecture has predefined
on page