Viewcube Options - Autodesk 24000-000000-9860 - Revit Architecture - PC User Manual

Option
Speed
Zoom Tool
Enable Incremental Zoom In
Orbit Tool
Keep Scene Upright
Selection Sensitivity
For more information, see

ViewCube Options

On the ViewCube tab of the
Option
ViewCube Appearance
Show the ViewCube
On-screen Position
ViewCube Size
Inactive Opacity
510 | Chapter 9 Customizing Project Settings
SteeringWheels on page 175.
Options dialog, specify options for the ViewCube navigation tool.
Definition
As you use the Walk tool to walk or "fly" through a model,
you can control the movement speed. The speed of move-
ment is controlled by the distance that the cursor is moved
from the Center Circle icon. Set the movement speed here.
See Walk Tool on page 190.
Allows you to zoom the view with a single click. See
Tool on page 191.
Keeps the sides of the view perpendicular to the ground
plane.
If you deselect this option, you can orbit the model in full
360 degree motion, which may be useful when you are
editing a family.
See Orbit Tool on page 186.
When this option is selected, and you select an element in
the drawing area, the Orbit tool orbits around the element's
center.
When it is deselected, the Orbit tool orbits based on the
center of the model, regardless of whether any elements are
selected or not. The center of the model defaults to the center
of the current geometry, but you can modify the center with
the Center tool.
See Orbit Tool on page 186 and
Definition
Show or hide the ViewCube in 3D views.
Specify the position of the ViewCube in the drawing area.
Specify the size of the ViewCube.
Specify the opacity of the ViewCube when not in use. If you
select 0% the ViewCube will not display in the drawing area
Zoom
Center Tool on page 183.