Model Lines - Autodesk 24000-000000-9860 - Revit Architecture - PC User Manual

Name
Cost
IFC Parameters
Operation
Window Instance Properties
Name
Constraints
Level
Sill Height
Identity Data
Comments
Mark
Phasing
Phase Created
Phase Demolished
Other
Head Height

Model Lines

The Lines command creates model lines in the project. Model lines exist in 3D space and are visible in all
views.
Description
Cost of the window.
The operation of the window, as defined by the current IFC description (for example,
single_panel or triple_panel_horizontal). These values are case-insensitive, and un-
derscores are optional. (SINGLE_PANEL and SinglePanel are the same.)
Description
The level on which the window is placed.
The height above the level for the window sill. This does not change the window
size.
Specific comments about the window type.
A label applied to the window; usually a numeric value. This value must be unique
for each window in a project. Revit Architecture warns you if the number is already
used, but allows you to continue using it. (You can see the warning using the
Warnings command.)
The phase when the window was created.
The phase when the window was demolished.
The height above the level for the top of the window. This does not change the
window size.
Review
Model Lines | 741