Ceiling Instance Properties - Autodesk 24000-000000-9860 - Revit Architecture - PC User Manual

Name
Keynote
Model
Manufacturer
Type Comments
URL
Description
Assembly description
Assembly code
Type Mark
Cost
Material

Ceiling Instance Properties

Name
Constraints
Level
Height Offset From Level
Dimensions
Slope
656 | Chapter 11 Working with Architectural Components
Description
Add or edit the ceiling keynote. Click in the value box to open the Keynotes dialog.
See Keynotes on page 1058.
Specify the model for the materials comprising the ceiling.
The manufacturer for the ceiling materials.
General comments about the ceiling type. This information can be included in a
schedule.
Sets a link to a web page.
Provides a description of the ceiling.
Description of the assembly based on the assembly code selection.
Uniformat assembly code selected from hierarchical list.
A value to designate the particular ceiling, such as 1A, 2B, and so on. This value
must be unique for each ceiling in a project. Revit Architecture warns you if the
number is already used but allows you to continue using it. (You can see the warning
using the Review Warnings command. See
1334.)
Cost of the materials for constructing the wall.
Specifies the appearance of the ceiling in various views, including a raytraced model.
For more information on setting a material, see
Description
The level at which the ceiling resides.
Sets an offset for the ceiling relative to the specified level.
Changes the value of the slope-defining line to the specified value, without the need
to edit the sketch. The parameter initially displays a value if there is a slope-defining
line. If there is no slope-defining line, the parameter is blank and disabled.
Reviewing Warning Messages
Materials on page 459.
on page