Autodesk 24000-000000-9860 - Revit Architecture - PC User Manual page 774

Name
URL
Description
Assembly Description
Assembly Code
Type Mark
Fire Rating
Cost
IFC Parameters
Operation
Door Instance Properties
Name
Constraints
Level
Sill Height
Construction
Frame Type
Materials and Finishes
Frame Material
Finish
736 | Chapter 11 Working with Architectural Components
Description
Sets a link to a manufacturer web page.
Provides a description for the door.
Description of the assembly based on the assembly code selection.
Uniformat assembly code selected from hierarchical list.
A value to designate the particular door. This value must be unique for each door
in a project. Revit Architecture warns you if the number is already used but allows
you to continue using it. (You can see the warning using the Review Warnings
command. See Reviewing Warning Messages
quentially. See Creating Sequential Door or Window Tags
The fire rating of the door.
The cost of the door.
The operation of the door, as defined by the current IFC description (for example,
single_swing_left or double_door_double_swing). These values are case-insensitive,
and underscores are optional. (SINGLE_SWING_LEFT and SingleSwingLeft are the
same.)
Description
The level on which the door is placed.
The height of the door sill. This does not change the door size.
The type of frame around the door.
The material used for the frame.
The finish applied to the frame and door.
on page 1334.) Marks are assigned se-
on page 1070.