Modifying A Beam System; Modifying Beam System Properties; Beam System Type Properties - Autodesk 24000-000000-9860 - Revit Architecture - PC User Manual

Modifying a Beam System

To edit a beam system
1 Select the beam system.
2 On the Options Bar, click Edit.
3 Make any necessary changes, and click Finish Sketch.

Modifying Beam System Properties

You can modify many of the properties for beam systems.
To modify beam system properties
1 If you are in sketch mode, on the Design Bar, click Structural Beam System Properties. If you are
2 In the Element Properties dialog, edit beam system instance parameters.
3 Click Edit/New and edit beam system type parameters.
4 When you finish, click OK.

Beam System Type Properties

Name
Identity Data
Keynote
Model
Manufacturer
Type Comments
URL
Description
Assembly description
in a project view, select the beam system, and click
NOTE Changes made to type parameters affect all beam systems of this type in the project. You can
click Duplicate to create a new beam system type.
.
Description
The beam keynote. Add or edit the value. Click in the value
box to open the Keynotes dialog. See
The manufacturer internal number.
The shape manufacturer.
A field for entering general comments about the shape type.
This information can be included in a schedule.
A link to a web page that may contain type-specific informa-
tion.
Description of the beam. Enter a description.
Description of the assembly based on the assembly code se-
lection. This is a read-only value.
Modifying a Beam System | 825
Keynotes on page 1058.