Show Ipsec Transport Interface - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide N to Z

show ipsec transport interface

show ipsec transport interface [ detail ] [ application applicationType ]
Syntax
[ state { up | down } ] [ interfaceName |
[ virtual-router vrName ] destination destAddress | local localAddress ] [ filter ]
To display summary information:
show ipsec transport interface summary
Command introduced before JUNOSe Release 7.1.0.
Release Information
Displays all details, including statistics, of IPSec transport connections that match
Description
the specified criteria.
Options
Privileged Exec
Mode
888
show ipsec transport interface
detail Includes statistics for the displayed connection
applicationType Application protected by IPSec transport connections
state Displays connections that are in the specified state, up or down
interfaceName Connection number that you want to display
vrName Name of a virtual router. If you do not specify a virtual router, the
router displays connections on the current virtual router context. Notice that the
local and destination IP addresses exist in the current virtual router context.
destAddress IP address of remote endpoint
localAddress IP address of local endpoint
filter See Filtering show Commands on page 4
summary Displays a summary of all IPSec transport connections