Show Bgp Group - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

show bgp group

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
2298
®
OS for EX Series Ethernet Switches, Release 10.4
show bgp group
<brief | detail | summary>
<group-name>
<instance instance-name>
<logical-system (all | logical-system-name)>
<rtf>
show bgp group
<brief | detail | summary>
<group-name>
<instance instance-name>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display information about the configured Border Gateway Protocol (BGP) groups.
—Display group information about all BGP groups.
none
brief | detail | summary —(Optional) Display the specified level of output.
—(Optional) Display group information for the specified group.
group-name
instance instance-name —(Optional) Display information about a particular BGP peer in
the specified instance. The instance name can be master for the main instance, or
any valid configured instance name or its prefix.
logical-system (all | logical-system-name)
systems or on a particular logical system.
rtf —(Optional) Display BGP group route targeting information.
view
show bgp group on page 2301
show bgp group on page 2302
show bgp group brief on page 2302
show bgp group detail on page 2302
show bgp group rtf detail on page 2303
show bgp group summary on page 2303
show bgp group summary on page 2303
Table 296 on page 2299 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
—(Optional) Perform this operation on all logical
show bgp group
Copyright © 2010, Juniper Networks, Inc.
command.