Table of Contents
Advertisement
JUNOSe 11.1.x Command Reference Guide N to Z
show ip bgp peer-group
show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName |
Syntax
l2vpn [ all ] | route-target signaling ] peer-group [ peerGroupName ] [ filter ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
l2vpn and all keywords added in JUNOSe Release 7.1.0.
route-target signaling keywords added in JUNOSe Release 8.2.0.
Displays information about BGP peer groups.
Description
Options
Privileged Exec, User Exec
Mode
Related Topics
746
show ip bgp peer-group
ipv4 unicast Specifies the IPv4 unicast address family and routing table; the
default option
ipv4 multicast Specifies the IPv4 multicast address family and routing table
vpnv4 all Specifies the IPv4 VPN address family and all IPv4 VPN routing and
forwarding instances
vpvn4 vrf vrfName Specifies the IPv4 VPN address family and only the IPv4
VPN routing and forwarding instance with the name vrfName
l2vpn Displays information for only the L2VPN address family
all Optional keyword; has no effect
route-target signaling Displays information for only the route-target address
family
peerGroupName Name of the BGP peer group
filter See Filtering show Commands on page 4
Monitoring BGP-Related Settings for L2VPNs in the JUNOSe BGP and MPLS
Configuration Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 and is the answer not in the manual?
Questions and answers