Frame-Relay Lmi-N393Dce - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

frame-relay lmi-n393dce

frame-relay lmi-n393dce events
Syntax
no frame-relay lmi-n393dce
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the monitored events count (N393) on a DCE interface. The no version removes
Description
current setting and sets the default.
Options
Interface Configuration
Mode
events Number in the range 1–10 events; specifies the diagnostic window used
to verify link integrity; default value is 2 events (The detection of N392 errors
within the window of N393 samples places the interface in an operationally
down state.)
Chapter 7: F Commands
frame-relay lmi-n393dce
633