Aaa Radius-Server - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

AAA Commands

aaa radius-server

Configures or modifies a RADIUS server for Authenticated Switch Access.
aaa radius-server server [host {hostname | ip_address} [hostname2 | ip_address2]] [key secret]
[retransmit retries] [timeout seconds] [auth-port auth_port] [acct-port acct_port]
no aaa radius server server
Syntax Definitions
server
hostname
ip_address
hostname2
ip_address2
secret
retries
seconds
auth_port
acct_port
Defaults
parameter
retries
seconds
auth_port
acct_port
Platforms Supported
OmniSwitch 10K
OmniSwitch CLI Reference Guide
The name of the RADIUS server.
The host name (DNS name) of the primary RADIUS server. The host
name or IP address is required when creating a server.
The IP address of the primary RADIUS server. An IP address or host
name is required when creating a server.
The host name (DNS name) of an optional backup RADIUS server.
The IP address of an optional backup RADIUS server.
The shared secret known to the switch and the server, but which is not
sent over the network. Can be any text or hexadecimal string but MUST
match the secret configured on the server. The secret is case-sensitive.
Required when creating a server.
The number of retries the switch makes to authenticate a user before
trying the backup server (hostname2 or ip_address2).
The timeout for server replies to authentication requests.
The UDP destination port for authentication requests.
The UDP destination port for accounting requests.
default
3
2
1812
1813
March 2011
aaa radius-server
page 28-3