Ip Routing Overview; Ip Routing And Routing Table - 3Com Switch 4800G 24-Port Configuration Manual

24
IP Routing and
Routing Table
Routing
Routing Through a
Routing Table
IP R
OUTING
Go to these sections for information you are interested in:
"IP Routing and Routing Table" on page 241
■
"Routing Protocol Overview" on page 243
■
"Displaying and Maintaining a Routing Table" on page 246
■
n
The term "router" in this document refers to a Layer 3 switch running routing
protocols.
Routing in the Internet is achieved through routers. Upon receiving a packet, a
router finds an optimal route based on the destination address and forwards the
packet to the next router in the path until the packet reaches the last router, which
forwards the packet to the intended destination host.
Routing table
Routing tables play a key role in routing. Each router maintains a routing table,
and each entry in the table specifies which physical interface a packet destined for
a certain destination should go out to reach the next hop (the next router) or the
directly connected destination.
Routes in a routing table can be divided into three categories by origin:
Direct routes: Routes discovered by data link protocols, also known as interface
■
routes.
Static routes: Routes that are manually configured.
■
Dynamic routes: Routes that are discovered dynamically by routing protocols.
■
Contents of a routing table
A routing table includes the following key items:
Destination address: Destination IP address or destination network.
■
Network mask: Specifies, in company with the destination address, the address
■
of the destination network. A logical AND operation between the destination
address and the network mask yields the address of the destination network.
For example, if the destination address is 129.102.8.10 and the mask
255.255.0.0, the address of the destination network is 129.102.0.0. A
network mask is made of a certain number of consecutive 1s. It can be
expressed in dotted decimal format or by the number of the 1s.
O
VERVIEW