Cross Hair Offset - Leica 3D Disto User Manual

3D Disto, Check & Adjust
9.2
Problem
Adjustment step-
by-step

Cross Hair Offset

The laser point and the cross hair in the Viewfinder do not coincide.
Before calibration:
3D Disto_029
a) Cross hair
b) Laser spot
1. Calibration is started in Menu » Device » Calibration.
2. Press .
3. Viewfinder opens. Place a target mark in >25 m distance. Now aim the target
mark as precisely as possible. Press
target.
After calibration:
a
b
3D Disto_030
if the red laser spot is exactly on the
150