Manual Mode With Cross Axis Self-Leveling - Leica Rugby 55 User Manual

2.5
X
H.I.
Basic Operation

Manual Mode with cross axis self-leveling

The Rugby is designed to always start up in automatic mode *
*) It may be desirable to save a manual setup. The automatic mode on start
up can be disabled using a special procedure found in the Troubleshooting
section.
Press the Auto/Manual Button once to change the Y-axis to manual
mode
• The Y-axis will not self-level and slope can be entered in this axis using the
arrow buttons on the Rugby or the remote control.
Y
• The X-axis will continue to self-level.
• The Y-axis LED will be red.
• The X-axis LED will blink green until level.
When the Y-axis is in manual mode, the Y-axis can be sloped
as illustrated here.
The X and Y axes are marked on the top of the Rugby.
Rugby 55 2-9