STMicroelectronics SPC572L series Reference Manual page 2036

Revision history
Date
03-Apr-2013
2036/2058
Table 1150. Revision history(Continued)
Rev
Table 9 (PFCRDE field descriptions): replaced all instances of generic
Calibration Descriptor number n with actual number for that Descriptor
Section 1.5.1.7.1, PFlash Calibration Region Descriptor n, Word0
(PFCRDn.Word0): least significant 3 bits of LSTARTADDR are reserved.
This is related to the PFCRDn.Word2[CRDSize] field no longer
supporting sizes 1byte, 2bytes or 4bytes.
– Section 1.5.1.7.2, PFlash Calibration Region Descriptor n, Word1
(PFCRDn.Word1): least significant 3 bits of PSTARTADDR are reserved
and are always 0.
Section 1.5.1.7.3, PFlash Calibration Region Descriptor n, Word2
(PFCRDn.Word2): the FCRDn.Word2[CRDSize] field no longer
supports sizes 1byte, 2bytes or 4bytes. Values 00000, 00001, and 00010
are reserved.
Chapter 29, Embedded Flash Memory
Section 1.2, Flash memory map and
BAF is 8KB in size, then it is integrated with the 8KB UTEST area..."
Table 7: TestFlash block memory
– Removed "Manufacturer Reserved Test Flash area" row
– Added rows "Flash Firmware — Minor identifier (f)", "Flash Firmware —
Major identifier (F)", "Flash parameters identifiers (P)", "Flash Firmware
and parameters — unused"
Updated Table 10: Flash User Registers memory
Table 11: MCR field
2
"UT0.AIE" to "UT0.UTE"
(cont'd)
Added Chapter 37: Flash Memory Programming and Configuration
Chapter 32, Error Injection Module (EIM)
Section 32.2.1, Memory map: renamed (was "Register summary")
Table 327 (EIM memory map): specified 6-channel support
Table 328 (Error Injection Module Configuration Register (EIMCR) field
description): in row GEIEN changed channel range to "0–5" (was 0–3)
Figure 295 (Error Injection Channel Enable (EICHEN) register): displayed
6-channel support
Section 32.3, Functional description: added content.
Removed sections "Modes of operation", "External signal description",
"Detailed signal descriptions", "Initialization information", and
"Application information"
Chapter 33, Error Reporting Module (ERM)
Table 333 (ERM memory map): renamed (was "Error Reporting Module");
updated columns Register and Location; renamed all sections, figures,
and tables
Table 335 (ERM_SR field descriptions): updated field of bit 1 to NCE0 (was
"NCE00")
Table 336 (ERM_EARn field description): renamed EAR field (was "EARn")
Table 337 (ERM_SYNn field descritption): renamed SYNDROME field
(was "SYNDROMEn")
DocID027809 Rev 4
Changes
description: added footnote "If the
map:
descriptions: in PGM and ERS fields changed
RM0400
map: