STMicroelectronics SPC572L series Reference Manual page 2055

RM0400
Date
27-Feb-2015
26-Sep-2017
Table 1150. Revision history(Continued)
Rev
Chapter 1: Mode Entry Module
57: e200z215An3 Core Debug
Chapter 65: Buddy Device—Debug and Calibration Interface (DCI)
Figure 1443 (DCI control register
to "FPD_DEST" (was "FPD_DEST_RST")
Chapter 66: Buddy Device—JTAG Controller (JTAGC)
Table 1529: 6-bit JTAG
Chapter 59: Buddy Device—JTAG Master (JTAGM)
Table 1346: JTAGM_MCR register field
combination descriptions for fields "EVTI0_ASSERT" and
"EVTI0_ASSERT"
Revised Section 59.5.1.2, Status register (JTAGM_SR)
Rev 3
(cont'd)
Chapter 68: Password and Device Security Module (PASS)
Table 887: LCSTAT register field
to the "LIFE" field description
Table 897: Debug Interface Enable Truth
– Removed the columns "Production Disable mode" and "Clock Jitter
Enable"
– Added JDP Production to "Customer Delivery" in column Lifecycle
Table 898: Flash Memory Read Protection Truth
"Censored" information for Lifecycle "Failure Analysis"
Chapter 86: Wakeup Unit (WKPU)
Section 86.2.2,
(was 16)
Updated disclaimer
"SPC572LxB" updated to "SPC572Lx" throught the document
Chapter 2: Introduction
Replaced "eLQFP100" with "eTQFP100"
Chapter 3: Embedded memories
Section 3.2.1: System
Section 3.4: Security
Chapter 4: Signal description
Rev 4 Replaced "eLQFP100" with "eTQFP100"
Chapter 5: Memory map
Table 11: UTEST flash memory
– Updated the "DCF Records" row.
– Updated all "OPACR" with "PCTL"
Chapter 6: Device configuration
Table 12: Reset settings for e200z215An3
replaced from "-" to "0x0000_0003"
DocID027809 Rev 4
Changes
(MC_ME): no substantial changes
Support: unchanged
(DCI_CR)): renamed field relative to bit 8
instructions: removed "ACCESS_AUX_DWPU" row
descriptions: added "110 JDP Production"
Features: changed number of I/O external interrupts to 13
SRAM: Replaced "PFCR1" with "PRCR1"
features: Removed the note.
map:
Revision history
descriptions: updated binary
Table:
Table: added Censorship
resources: Value of "MMUCFG"
2055/2058
2057