STMicroelectronics SPC572L series Reference Manual page 2043

RM0400
Date
03-Apr-2013
Table 1150. Revision history(Continued)
Rev
Chapter 1: Power Management Controller digital interface (PMC_dig)
All registers in chapter updated in line with new Voltage Detector setup on
device
55: Power Control Unit (MC_PCU)
Table 806: MC_PCU register
"Description" into column "Register"
Removed table "MC_PCU memory map"
Chapter 1: Mode Entry Module (MC_ME)
Table 3: MC_ME register
"Description" into column "Register"
Removed table "MC_PCU memory map"
57: e200z215An3 Core Debug Support
Section 57.5.3, JTAG/OnCE
will cause the chip to..."
Section 57.5.7, Access to debug
control bit" to paragraph "Some cases of write accesses..."
Chapter 65: Buddy Device—Debug and Calibration Interface (DCI)
The mux sequences of various JTAG sources updated
Section 65.3.1, DCI control register
– Renamed field "FPD_FUNC" (was "FPD_ESR0")
– Renamed field "FPD_DEST" (was "FPD_PORST")
2
(cont'd)
Chapter 66: Buddy Device—JTAG Controller
Chapter 58, IEEE 1149.7 Compact JTAG Test Access Port Controller
(CJTAG)
Section 1.7, APU (Advanced Protocol Unit)
(Advanced Protocol Unit")
Added Section 1.8, Functional Description
Section 1.6.2.3.15, Auxiliary Pin Function Control
APFC encoding value
Chapter 68: JTAG Data Communication (JDC)
Added reset source information for each register
Table 1561: JTAG
updated content
Chapter 59: Buddy Device—JTAG Master (JTAGM)
Table 1346: JTAGM_MCR register field
being written to..." in descriptions of fields "SWRESET", "evti1_assert"
and "TCKSEL"
Section 59.5.1.2, Status register
field NR
Chapter 61, Sequence Processing Unit (SPU)
Removed all conent and references relating to NXMC and EVTI/O 1
Section 61.5, Register definition: removed C0PEVP register; added
C2PEVP register; removed C0PIS register; added C2PIS register
DocID027809 Rev 4
Changes
description: marged columns "Name" and
description: marged columns "Name" and
pins: changed sentence "Asserting dbg_dbgrq
resources: added text "via the OCR
(DCI_CR):
instructions: renamed (was "6-bit JTAG instructions");
descriptions: added note "After
(JTAGM_SR): added note in description of
Revision history
(JTAGC): unchanged
Operation: renamed (was "APU
(APFC[1:0]): corrected
2043/2058
WKUP
2057