Check Modified Parameters - YASKAWA GA800 Programming Manual

3.4 Keypad Operation
3.
Push or
4.
Push or
5.
Push or
6.
Push or
The keypad will show the "End" message when the write process is complete.
◆

Check Modified Parameters

This procedure will show all parameters that were changed from their defaults as the result of Auto-Tuning or setting
changes. This helps find which settings have been changed, and is very useful when you replace a drive. This lets
users quickly access and re-edit changed parameters. If no parameters have been changed, the keypad will show "0
Parameters".
1.
Push (Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on
2.
Push (Menu).
570
to select [Parameter Backup/Restore], then push
to select the item to verify, then push
to select [Delete (keypad)], then push
to select the data to delete, then push
, push (Back) to show [Home] on
.
.
.
.
.
YASKAWA TOEPYAIGA8002B GA800 Drive Programming