show ipv6 ospf area
Use the show ipv6 ospf area command in Privileged EXEC mode to display information about
the area.
Syntax
areaid
show ipv6 ospf area
areaid — Identifier for the OSPF area being displayed.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays information about area 1.
console#show ipv6 ospf area 1
AreaID......................................... 0.0.0.1
External Routing............................... Import External LSAs
Spf Runs....................................... 0
Area Border Router Count....................... 0
Area LSA Count................................. 0
Area LSA Checksum.............................. 0
Stub Mode...................................... Disable
Import Summary LSAs............................ Enable
show ipv6 ospf asbr
The show ipv6 ospf asbr command displays the internal OSPFv3 routes to reach Autonomous
System Boundary Routes (ASBR). This command takes no options.
Syntax
show ipv6 ospf asbr
825