Feature Fip-Snooping - Dell MXL 10GbE Reference Manual

Version 8.3.16.1

feature fip-snooping

Enable FCoE transit and FIP snooping on a switch.
Syntax
feature fip-snooping
To disable the FCoE transit feature, use the no feature fip-snooping
command.
Defaults Disabled
Command CONFIGURATION
Modes
Command
Version 9.2(0.0)
History
Version 8.3.16.1
fip-snooping enable
Enable FIP snooping on all VLANs or on a specified VLAN.
Syntax
fip-snooping enable
To disable the FIP snooping feature on all or a specified VLAN, use the no fip-
snooping enable command.
Defaults FIP snooping is disabled on all VLANs.
Command
•
Modes
•
Command
Version 9.2(0.0)
History
Version 8.3.16.1
Usage The maximum number of FCFs supported per FIP snooping-enabled VLAN is four.
Information The maximum number of FIP snooping sessions supported per ENode server is 16.
FIP Snooping
Introduced on the MXL 10/40GbE Switch IO Module.
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Introduced on the MXL 10/40GbE Switch IO Module.
CONFIGURATION
VLAN INTERFACE
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Introduced on the MXL 10/40GbE Switch IO Module.
517