Setting The System Name - 3Com SuperStack II 3300 User Manual

Setting the System
Name
To change the password:
1 Enter the following at the top-level menu:
system password
The following prompt is displayed:
Password access level (read,write,administer):
2 Enter the required access level.
Old password:
3 Enter the old password.
New password:
4 Enter the new password.
The password can have up to 31 characters and is case-sensitive. To enter
a null password, press [Enter].
5 Retype the new password for verification. The system does not display
the password in any of the fields as you type.
6 Repeat steps 1 to 5 for each level of password that you want to
configure.
Assign an easily recognizable and unique name to the Layer 3 Module to
help you manage the module. For example, name the system according
to its physical location (for example, ENGLAB).
To set the system name:
1 Enter the following at the top-level menu:
system name
The following prompt is displayed:
Enter new string {?} [L3Module-000000]:
2 Enter a name that is both unique on the network and meaningful to you.
The new system name appears the next time that you display the system
configuration.

Setting the System Name

51