Isis Timer Csnp; Isis Timer Hello - 3Com 8807 Command Reference Manual

Integrated IS-IS Configuration Commands 481

isis timer csnp

Syntax
isis timer csnp seconds [ level-1 | level-2 ]
undo isis timer csnp [ level-1 | level-2 ]
View
Interface view
Parameter
seconds: Specifies the CSNP packet interval on the broadcast network, ranging
from 1 to 65535 and measured in seconds. By default, the value is 10 seconds.
level-1: Specifies the Level-1 CSNP packet interval.
level-2: Specifies the Level-2 CSNP packet interval.
Description
Use the isis timer csnp command to configure the interval of sending CSNP
packets on the broadcast network.
Use the undo isis timer csnp command to restore the default value, that is, 10
seconds.
Only DIS can periodically send CSNP packets, therefore, this command is valid only
for the router that is selected as the DIS. Furthermore, DIS is divided into level-1
and level-2, and their intervals of sending CSNP packets must be set respectively.
Example
# Set the CSNP packet of Level-2 to be transmitted every 15 seconds on the
interface Vlan-interface 10.
[SW8800] interface Vlan-interface 10
[3Com-Vlan-interface10] isis timer csnp 15 level-2

isis timer hello

Syntax
isis timer hello seconds [ level-1 | level-2 ]
undo isis timer hello [ level-1 | level-2 ]
View
Interface view
Parameter
seconds: Specifies the Hello interval, ranging from 3 to 255 and measured in
seconds. The default value is 10 seconds.
level-1: Specifies the Level-1 Hello interval.
level-2: Specifies the Level-2 Hello interval.
If no level is not specified, the Hello interval is set to Level-1-2, that is, both Level-1
and Level-2 take effect.